
Phased-array probe cable for an industrial NDT customer
- Challenge
- [Channels, AWG, length, problem with the old supplier]
- What we did
- [Cable, termination, test plan]
- Result
- [Real number: yield, lead time, volume]
FRS Cable is the manufacturer, not a trading company. We build micro-coax harnesses and LVDS, eDP and MIPI cables on our 7 automated lines in , China, and the engineers who set up those lines quote your drawing.
*Working days after drawing approval, with connectors in stock.
Filmed on our own floor in . No stock footage.
Building micro-coax assemblies for industrial ultrasound customers and buyers in countries.
Three micro-coax constructions and one family of display and camera interface cables, from one prototype run to steady production. We don't sell raw cable by the meter, and we don't make RF or antenna cables.
Drop the file and add your email. Quote within 24 hours.
36 micro-coax and fine-pitch connector series from I-PEX, Hirose, KEL and JAE, with board-side and cable-side part numbers. Search the number on your drawing; if it isn't listed, send it anyway.
No series matches “”. Send us the part number: we'll confirm within 24 hours whether we can build it.
Reading I-PEX numbers: the board gets the receptacle (e.g. 20455), your cable drawing names the plug cable assembly (e.g. 20453), and we buy the plug housing (e.g. 20454) and its parts to build it.
Part numbers from the makers' websites and catalogs, November 2026, for reference only; the latest datasheet rules. I-PEX, CABLINE, Hirose, KEL and JAE are trademarks of their owners.
Every assembly is built, tested and packed under one roof in , China. Watch the floor, then check the numbers.
Walk-through of our workshop, filmed on our own floor.





Micro coax below 40 AWG is a different job from ordinary wire harnessing. These are the problems buyers bring to us most.
We terminate 34 to 50 AWG on 7 automated lines built for micro coax.
We build 96 to 1024-channel harnesses, and every one is 100% electrically tested before it ships.
You get a quote within 24 hours, or our engineering questions if the drawing needs them.
Samples ship in 5–7 working days after drawing approval, by UPS, DHL or FedEx.
We build on our own floor. Book a live video tour and see the line before you order.
IATF 16949 and ISO 13485 quality systems, lot traceability and test records on request.
Nothing is outsourced, so you deal with one company from incoming inspection to shipping. Tap a photo with ▶ to watch that step.
Continuity, opens and shorts on every piece, on our own test equipment. Here's the equipment and paperwork behind that.
| Equipment | Qty | Used for |
|---|






Incoming material (IQC), in-process (IPQC) and final (OQC) inspection on every lot.
Each lot links back to its cable and connector batches and its test records.
On-site audits and live video audits. Your auditor picks what to see.
The four things engineers ask in their first email: what we can build, what we check on your drawing, which wire size to use, and how we build LVDS, eDP and MIPI links.
| Micro coax size | 34 to 50 AWG |
|---|---|
| Discrete PTFE wire | 32, 34 and 36 AWG |
| Channels per assembly | 1 to 1024 (ultrasound: 96, 126, 128, 256, 368, 512, 1024) |
| Cable types | Single micro coax, multi-core jacketed, hybrid coax + discrete (custom cable available) |
| Termination | Laser stripping, ground bar, soldering to connector, PCB or FPC |
| Connectors | and others, to the part numbers on your drawing |
| Finest pitch | |
| Production | 7 fully automated micro coax lines |
| Testing | 100% electrical test (continuity, open, short) before shipment |
| Quote | Within 24 hours |
| Samples | Ship in 5–7 working days after drawing approval, connectors in stock |
| MOQ | |
| Shipping | UPS, DHL or FedEx express, door to door, or your own forwarder |
| Not offered | RF or antenna cables, raw cable by the meter, repairs, external consumer cables |
Free with every quote: an engineer goes through these 10 points on your drawing and tells you, before you pay anything, what would hurt yield, cost or signal quality.
We build micro coax from 34 to 50 AWG. Start with 40 or 42 AWG: they are the most common sizes, with the best price and lead time.
| AWG | Conductor (mm) | OD 45 Ω (mm) | OD 50 Ω (mm) | Max current (A) |
|---|---|---|---|---|
| 34 | 0.19 | 0.67 | 0.73 | 1.0 |
| 36 | 0.15 | 0.49 | 0.55 | 0.8 |
| 38 | 0.12 | 0.39 | 0.46 | 0.5 |
| 40 | 0.09 | 0.33 | 0.37 | 0.4 |
| 42 | 0.075 | 0.29 | 0.32 | 0.3 |
| 44 | 0.060 | 0.24 | 0.27 | 0.2 |
| 46 | 0.048 | 0.20 | 0.22 | 0.15 |
| 48 | 0.038 | 0.16 | 0.18 | 0.10 |
| 50 | 0.030 | 0.14 | 0.16 | 0.08 |
Typical values for 7-strand micro coax, for early design only. Your cable's datasheet rules.
Display and camera links fail on details: pair impedance, skew and the pin-out. This is how we build them, and what we'll ask you for.
| Interface | How we build it | Typical connectors | Length |
|---|---|---|---|
| LVDS | 100 Ω pairs: micro-coax pairs or twisted pairs, matched in length | JAE FI-RE, FI-X; Hirose DF19; I-PEX CABLINE-VS, CA | Most internal display links are under 1 m |
| eDP | 50 Ω micro-coax routed as 100 Ω pairs, plus aux, hot-plug and power wires | I-PEX CABLINE-VS (20453 / 20455), Hirose DF80 | Short internal runs; tell us the link rate |
| MIPI CSI-2 / DSI | Micro-coax pairs, data lanes matched to the clock lane | I-PEX CABLINE-UY, CA; Hirose DF56, DF36 | Many camera and chip makers recommend about 30 cm over FPC; micro-coax can reach further |
Most of our work sits inside imaging and sensing products, where the cable has to be thin, flexible and electrically clean.
Shared with customer permission. Part numbers and names removed.



Many “factories” online are trading companies, and catalog cables only come in standard lengths. Here's what changes when you buy from the people who build the part.
| Compared | FRS Cable (factory) | Trading company | Catalog cable |
|---|---|---|---|
| Who builds your part | Our 7 automated lines in | A factory you may never see | The connector maker, in standard versions |
| Length and pin-out | Built to your drawing | Built to your drawing | Fixed catalog lengths and pin-outs |
| Technical questions answered by | The engineer who sets up your job | A sales rep relaying messages | Datasheets and distributor support |
| Quote | Within 24 hours | Waits on the factory's reply | Listed price |
| Samples | Ship in 5–7 working days | Depends on the factory's schedule | From stock, or the maker's lead time |
| Price | Factory-direct, no middleman margin | Includes a trading margin | Catalog price, standard parts only |
| Testing | 100% electrical test on our own equipment | Depends on the factory | The maker's standard tests |
| Audits | Visit or live video audit any time | Factory access often limited | The maker's own quality system |
A live walk-through of our floor on video. You choose what we point the camera at.
Book a live factory tourIATF 16949 is only granted to sites that manufacture. Distributors and companies that outsource production aren't eligible. Ask for ours with your quote.
Factory visits are welcome: . Tell us your dates and we'll set it up.
We send our business license and certificates with your quote, on request.
You deal with an engineer from the first email. No sales script, no chasing.
Drawing, BOM or a photo of a sample. NDA first if you need one.
Price for your volumes, plus a note on anything that would hurt yield or cost.
Built on the production line, 100% tested, sent by UPS, DHL or FedEx.
Same process, same tests, lot traceability and door-to-door delivery.
*Working days after drawing approval, with connectors in stock.
Three short steps, about a minute. Skip anything you don't know yet; the engineer will ask.
✓ Live factory tour requested. We'll suggest times in our reply.

Your RFQ goes to our engineering team, not a sales desk.
UPS, DHL or FedEx express, door to door, or your own forwarder.
Incoterms:
Payment:

One page: what to put on a drawing so a factory can quote it first time. Free PDF by email.
Real questions from engineers and buyers, answered plainly. Can't find yours? Ask an engineer and get a reply within 24 hours.
No question matches “”. Ask an engineer: we reply within 24 hours.
Straight from the factory floor, 100% tested, delivered by UPS, DHL or FedEx.
What to put on a drawing so a factory can quote it first time. Free PDF.